Shop Now

• .TENG TOOLS.
  • AIR TOOLS & ACCESSORIES
    • AIR DUSTER/BLOW GUNS
  • AIR TOOLS & EQUIPMENT
    • AIR IMPACT WRENCHES
    • AIR LINE ACCESSORIES
  • AUTO SERVICE TOOLS
    • BALL JOINT SEPARATORS
    • CLIP & PANEL REMOVAL
    • ENGINE TOOLS
      • INJECTOR SOCKET
      • OIL SENDER SOCKETS
      • OXYGEN SENSOR SOCKETS
      • SPARK PLUG SOCKETS
      • VACUUM SWITCH SOCKETS
    • HONE STONES
    • HOOK & PICKS
    • HOSE TOOLS
    • OIL TOOLS
    • SCREW EXTRACTORS & SETS
    • TYRE TOOLS
  • BARS
    • PRY BARS
    • ROLL/HEEL BARS
  • BITS & DRIVERS
    • DRIVERS
    • EXTENSIONS
    • HEX BIT HOLDERS
    • IMPACT BITS
      • 5/16" IMPACT BITS
      • HEX
      • NUT DRIVER
      • PHILLIPS
      • POZI
      • SQUARE/ROBINSON
      • TORX
    • IMPACT DRIVERS
    • SETS
    • SOCKET ADAPTORS
    • STANDARD BITS
      • FLAT/SLOTTED
      • HEX
      • PHILLIPS
      • POZI
      • SQUARE/ROBINSON
      • TORX
      • TPX SECURITY TORX
  • CUTTING & TAPPING TOOLS
    • THREADING / TAP & DIE
  • CUTTING HAND TOOLS
    • BOLT CUTTERS & NIPPERS
      • BOLT CUTTERS
      • CUTTING NIPPERS
        • END CUTTER
        • MIDGET CUTTER
    • CABLE/WIRE ROPE CRIMPING & CUTTING
      • CABLE CUTTERS
      • WIRE ROPE & SPRING WIRE CUTTERS
    • ELECTRICAL CRIMP, CUT & STRIP
      • ELECTRICAL SCISSORS
      • TERMINAL CRIMPERS
    • FILES
    • KNIVES
      • BLADES
      • SNAP OFF KNIVES
    • PIPE & TUBE CUTTING/BENDING
    • SAWS
      • BLADES
      • HACKSAWS
    • SCISSORS
    • SCRAPERS
    • TIN SNIPS
  • DEBURRING & EXTRACTING TOOLS
    • DEBURRING TOOLS
    • EXTRACTOR SOCKETS
    • STUD & NUT REMOVERS
  • ELECTRICAL TESTING EQUIPMENT
    • MULTIMETERS
  • HAMMERS
    • BALL PEIN
    • BODY WORK
    • CLAW
    • CLUB
    • DEAD BLOW
    • ENGINEERS
    • SOFT FACE
  • HEX & TORX KEYS
    • BALL-END HEX KEYS
    • EXTRA LONG
    • SETS
    • STANDARD HEX KEYS
    • T-HANDLE
      • INDIVIDUAL
    • TORX KEY
    • TPX SECURITY TORX
  • INSULATED TOOLS
    • EXTENSION BARS
    • KNIVES
    • PLIERS [INSULATED]
    • RATCHETS
    • SCREWDRIVERS
    • SETS
    • SOCKETS
    • SPANNERS
  • LIGHTING L.E.D
    • FLEXIBLE LIGHTS
    • HEADLAMPS
    • LED WORKLIGHTS
  • MEASURING TOOLS
    • COMBINATION SQUARES
    • DIGITAL CALIPERS
    • ENGINEERS SQUARES
    • GUAGES
    • LEVELS
    • SCRIBERS
    • TAPE MEASURES
    • VERNIER CALIPERS
  • MERCHANDISE
    • BAR FRIDGE
  • PICK UP & INSPECTION TOOLS
    • CLAW PICKUP TOOLS
    • MAGNETIC TOOLS
    • MAGNIFIERS & MIRRORS
  • PLIERS
    • CABLE CUTTERS
    • CABLE TIE GUN
    • CIRCLIP & SNAP RING
    • COMBINATION/LINESMAN
    • CRIMPING & STRIPPING
    • END CUTTERS
      • CARPENTERS
      • END NIPPERS
      • TOWER PINCERS
    • FENCING/WIRE TWISTING
    • GRIP PLIERS
    • GROOVE JOINT
    • LONG NOSE
    • SETS
    • SIDE/DIAGONAL CUTTERS
    • WATER PUMP
  • PULLERS
    • 2/3 ARM PULLER
    • SPARE PARTS
    • UNIVERSAL PULLER
  • PUNCHES & CHISELS
    • CENTRE PUNCHES
    • COLD CHISELS
    • PIN PUNCHES
    • SETS
  • RIVETING TOOLS
    • NUT RIVETERS
    • RIVETERS
      • HAND RIVETERS
      • LAZY TONG RIVETERS
  • SAFETY & WORKWEAR
    • SAFETY GLASSES
  • SCREWDRIVERS
    • BLADES
    • FLAT/SLOTTED
    • HANDLES
    • HEX
    • HEX [BALL END]
    • HOSE CLIP DRIVERS
    • MAGNETISER/DEMAGNETISER
    • NUT DRIVER
    • NUT DRIVERS
    • PHILLIPS
    • PHILLIPS PH
    • POZI
    • POZI PZ
    • ROBINSON
    • SCREWDRIVER SETS
    • SECURITY TORX TPX
    • SQUARE/ROBINSON
    • TORX
    • TORX TX
    • TPX
    • TX TORX
  • SOCKET SETS
    • BIT SOCKET SETS
    • IMPACT SOCKET SETS
    • REGULAR SOCKET SETS
  • SOCKETRY
    • ADAPTORS & ACCESSORIES
      • IMPACT
      • REGULAR
    • BARS & HANDLES
      • EXTENSION BARS
      • POWER & FLEX BARS
      • RATCHETS
      • SLIDING T-BAR
      • SPEED BRACE
      • SPINNER HANDLES
      • T-BAR WITH SOCKET
    • BIT SOCKETS
      • FLAT/SLOTTED BIT
      • HEX BIT
      • PHILLIPS BIT
      • POZI BIT
      • RIBE
      • SPLINE
      • TORX BIT
      • TPX SECURITY TORX BIT
    • CROWFOOT
    • IMPACT SOCKET SETS
    • IMPACT SOCKETS
      • DEEP
      • STANDARD
    • REGULAR SOCKETS
      • DEEP
      • STANDARD
    • SOCKET HOLDING RAILS
    • SPARK PLUG SOCKETS
    • SPINNER HANDLES
    • TX-E SOCKETS
  • SPANNERS & WRENCHES
    • COMBINATION
    • INDIVIDUAL
      • ADJUSTABLE
      • ADJUSTABLE WRENCHES
      • COMBINATION
      • DOUBLE END
      • FLARE NUT
      • HOOK & PIN
      • INSERT SPANNER
      • PIPE WRENCHES
      • PODGER WRENCHES
      • QUICK RING
      • SLOGGING
    • SETS
    • SPANNER HOLDER
  • SPARE PARTS
  • TOOL BAGS
    • TOOL BAGS [OPEN TOP]
  • TOOL KITS
    • MOBILE TOOL KITS
    • PORTABLE TOOL KITS
    • STATIONARY TOOL KITS
  • TOOL SETS
    • COMBINATION SETS
    • GENERAL TOOL KIT
    • SCREWDRIVERS
  • TOOL SETS [TENG TOOL TRAYS]
    • SETS
    • TOOL TRAY SETS [PS TRAY]
    • Tool Tray Sets [EVA Foam]
  • TOOL STORAGE
    • CARRYING CASES
    • MAGNETIC TRAYS
    • ROLLER CABINET
    • TOOL BOXES [MIDDLE/STACKER]
    • TOOL BOXES [ROLLER CABINET]
    • TOOL BOXES [TOP BOX]
  • TORQUE WRENCHES & ACCESSORIES
    • TORQUE ACCESSORIES
    • TORQUE MULTIPLIERS
    • TORQUE SCREWDRIVERS
    • TORQUE SPANNERS
    • TORQUE WRENCHES
  • VICES & CLAMPS
    • BENCH VICE
    • F CLAMPS
    • QUICK LEVER CLAMPS
  • WELDING TOOLS & EQUIPMENT
    • MIG PLIERS
    • WELDING MAGNETS
  • WORK BENCHES
  • WORKSHOP EQUIPMENT
• ENGINEERING CONSUMABLES AND ACCESSORIES
  • ABRASIVES
    • CUTTING DISCS
    • FLAP DISCS
    • GRINDING DISCS
    • QUICK CHANGE DISCS
    • STRIPX DISCS
    • SURFACE CONDITIONING DISCS
    • WIRE BRUSHES
  • ADHESIVES & SEALANTS
    • ADHESIVES
    • EPOXY
    • GASKETING
    • SEALANTS
    • SOLVENTS
    • THREADING
  • APPLICATOR TOOLS
  • AUTOMOTIVE
  • CABLE TIES
    • BLACK
    • CABLE TIE GUN
    • COLOURED
    • METAL DETECTABLE
    • NATURAL
    • UNI BAND
      • BUCKLE
      • CLAMPING TOOL
      • STRAP
  • CLEAN UP
  • CLEANERS & DEGREASERS
  • CORROSION PROTECTION
  • CUTTING
    • CARBIDE BURRS
    • KNIVES & BLADES
      • BLADES
      • KNIVES
    • MULTITOOL
    • RECIPROCATING BLADES
  • DRILLING
    • ANNULAR BROACH DRILLS
      • SETS
    • CONCRETE DRILLS
      • SETS
    • DRILL SETS
    • LEFT HAND DRILLS
    • METAL DRILLS
      • EXTRA LONG SERIES DRILL
      • IMPERIAL HSS JOBBER DRILL
      • LONG SERIES DRILL
      • METRIC COBALT JOBBER DRILL
      • METRIC HSS JOBBER DRILL
      • REDUCED SHANK DRILLS
        • IMPERIAL
        • METRIC
  • EYE PROTECTION
  • FOOD GRADE
  • GREASES
  • HAND PROTECTION
    • COATED GLOVES
    • DISPOSABLE GLOVES
    • LEATHER GLOVES
    • WELDING GLOVES
  • HEARING PROTECTION
  • HOLESAWS
    • ARBORS & ACCESSORIES
      • ARBOR
      • KWIK CHANGE
      • PILOT DRILL
    • BI-METAL
    • KITSETS
    • MULTI-PURPOSE
    • SHEET METAL
    • SMOOTH CUTTING
  • LUBRICANTS & PENETRANTS
  • MARKING
    • PAINTS
    • PENS
  • SPECIALTY
  • TAPES
    • CLOTH TAPE
    • INSULATION TAPE
    • MASKING TAPE
    • THREAD SEAL TAPE
  • THREADING
    • BUTTON DIES
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • DIE NUTS
      • (BSPF) BRITISH STANDARD PIPE FITTING
      • (BSPT) BRITISH STANDARD PIPE TAPERED
      • (BSW) BRITISH STANDARD WHITWORTH
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • TAP & DIE ACCESSORIES
    • TAP & DIE SETS
    • TAP SETS
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • TAPS
      • (BSPF) BRITISH STANDARD PIPE FITTING
      • (BSPT) BRITISH STANDARD PIPE TAPERED
      • (BSW) BRITISH STANDARD WHITWORTH
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (NPT) NATIONAL PIPE TAPERED
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • THREAD REPAIR KITS
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
      • COMBINATION
    • THREADING TAP EXTRACTOR SET
    • THREADLOCKING
  • WELDING
• FASTENERS
  • BOLTS AND SET SCREWS
    • BOLT AND SET SCREW
      • IMPERIAL BSW
      • IMPERIAL SAE
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
    • FLANGE BOLT
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
  • CONSTRUCTION
    • BOLT AND SET SCREW
    • COACH BOLT
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
    • COACH SCREW
      • COUNTERSUNK
      • STANDARD
    • CONCRETE ANCHORS
      • CONSCREW
      • DRIVE ANCHOR
      • DROP IN ANCHOR
        • SETTING TOOL
      • NAIL IN ANCHOR
      • NAIL IN PLUG
      • SCREW BOLT
      • SLEEVE ANCHOR
      • SPLIT DRIVE ANCHOR
      • THROUGH BOLT
    • HINGEFIX SCREW
    • PURLIN BOLT
    • RIVET
      • COUNTERSUNK
      • LARGE FLANGE
      • PEEL
      • SEALED
      • STANDARD
      • STRUCTURAL
    • SELF DRILLING METAL
      • BATTEN SCREW
      • BUTTONHEAD SCREW
      • COUNTERSUNK SCREW
      • COUNTERSUNK WING TEK SCREW
      • PANHEAD SCREW
      • TEK SCREW
      • TRUCK DECK SCREW
      • WAFERHEAD SCREW
    • STRIKE ANCHOR
    • STRUCTURAL ASSEMBLY
    • SUREFIX SCREW
    • TIMBER T17
      • BATTEN SCREW
      • PANHEAD SCREW
      • TEK SCREW
      • WAFERHEAD SCREW
    • WALL PLUG
    • WASHERS/SEALS
  • CUSTOM KITS
    • FASTTRADE KITS
    • GJ GRAB KITS
    • ORGANISER
  • HEX SOCKETS
    • ALLEN HEX KEYS BULK
    • BUTTON HEAD
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
    • CAP SCREW
      • IMPERIAL BSF
      • IMPERIAL BSW
      • IMPERIAL UNC
      • IMPERIAL UNF
      • LOW HEAD
      • METRIC COARSE
      • METRIC FINE
    • COUNTERSUNK
      • IMPERIAL BSF
      • IMPERIAL BSW
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
    • GRUB SCREW
      • CONE POINT
        • METRIC COARSE
      • DOG POINT
        • METRIC COARSE
      • KNURLED POINT
        • METRIC COARSE
      • SQUARE HEAD
        • IMPERIAL BSW
      • STANDARD
        • IMPERIAL BSW
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
        • METRIC FINE
    • PRESSURE PLUGS
    • SHOULDER SCREW
      • IMPERIAL UNC
      • METRIC COARSE
  • NUTS
    • ACME NUT
      • LEFT HAND
      • STANDARD
    • BARREL NUT
    • CAGED NUT
    • CASTLE NUT
      • IMPERIAL BSF
      • IMPERIAL BSW
      • IMPERIAL SAE
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
    • CONELOCK NUT
      • IMPERIAL SAE
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
    • COUPLING NUT
      • METRIC COARSE
    • DOME NUT
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
    • FLANGE NUT
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
    • FUJI NUT
      • IMPERIAL UNC
      • METRIC COARSE
      • METRIC FINE
    • GLENLOCH NUT
    • HALF NUT
      • IMPERIAL BSW
      • IMPERIAL SAE
      • IMPERIAL UNC
      • IMPERIAL UNF
      • LEFT HAND
      • METRIC COARSE
      • METRIC FINE
    • HALF NYLOC
      • IMPERIAL UNF
    • HEX NUT
      • IMPERIAL BSF
      • IMPERIAL BSW
      • IMPERIAL SAE
      • IMPERIAL UNC
      • IMPERIAL UNF
      • LEFT HAND
      • METRIC COARSE
      • METRIC FINE
    • INSERT NUT
    • LEFT HAND
      • HALF NUT
      • HEX NUT
    • MANIFOLD NUT
    • NYLOC NUT
      • IMPERIAL BSW
      • IMPERIAL SAE
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
    • RIVNUT
      • LARGE FLANGE
      • STANDARD
    • RUBBER NUT
    • SELF CLINCHING NUT
    • SQUARE NUT
      • IMPERIAL UNC
      • METRIC COARSE
    • STAND OFF NUT
    • TEE NUT
    • VANDAL PROOF NUT
    • WHEEL NUT
      • IMPERIAL UNF
      • METRIC FINE
    • WING NUT
      • IMPERIAL BSW
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
  • OTHER FASTENERS
    • CIRCLIP
      • E TYPE
      • EXTERNAL
      • INTERNAL
    • EXHAUST CLAMP
    • EYE BOLT
    • EYE NUT
    • EYE SCREW
    • FURNITURE FASTENERS
      • BARREL NUT
      • CONNECTOR BOLT
      • CONNECTOR NUT
      • CROSS DOWEL
      • DIRECTOR SCREW
      • INSERT NUT
      • LAG SCREW
      • TEE NUT
    • GREASE NIPPLE
      • 45 DEGREE
      • 67 DEGREE
      • 90 DEGREE
      • STRAIGHT
    • GUTTER BOLT
    • HINGES
      • BUTT HINGE
      • T-HINGE
    • HOLLOW WALL ANCHOR
    • HOSE CLAMP
      • DOUBLE EAR
      • NUT/BOLT
      • RUBBER LINED
      • STANDARD
      • T-BOLT
      • WORMDRIVE-KALE
    • KARABINER
    • KEY STEEL
    • PINS
      • CLEVIS PIN
      • COTTER PIN
      • DOWEL PIN
      • DRAWBAR PIN
      • IMPLEMENT PIN
      • LYNCH PIN
      • PIN BUSH
      • ROLL PIN
        • IMPERIAL
        • METRIC
      • SHAFT LOCKING PIN
      • TOP LINK PIN
    • PLOUGH BOLT
    • QUICK LINK
    • R CLIP
    • SHAFT COLLAR
    • STUDS
    • SWIVEL
    • THREADED ROD ANCHOR
    • TURNBUCKLE
    • U BOLT
      • ROUND
      • SQUARE
    • U DRIVE SCREW
    • WING SCREW
  • SCREWS
    • MACHINE SCREW
    • SECURITY SCREW
      • MACHINE SCREW
      • SELF TAPPING SCREW
    • SELF TAPPING SCREW
  • STAINLESS STEEL FASTENERS
    • BOLTS AND SET SCREWS
      • IMPERIAL BSW
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
    • CONSTRUCTION
      • COACH BOLT
        • IMPERIAL UNC
        • METRIC
        • METRIC COARSE
      • COACH SCREW
        • COUNTERSUNK
        • STANDARD
      • CONCRETE ANCHORS
        • DROP IN ANCHOR
        • NAIL IN ANCHOR
        • SLEEVE ANCHOR
        • THROUGH BOLT
      • SELF DRILLING METAL
        • COUNTERSUNK SCREW
        • PANHEAD SCREW
        • TEK SCREW
        • WAFERHEAD SCREW
      • SUREFIX SCREW
      • TIMBER T17
        • BATTEN SCREW
        • TEK SCREW
        • WAFERHEAD SCREW
    • HEX SOCKETS
      • BUTTON HEAD
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
      • CAP SCREW
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
        • METRIC FINE
      • COUNTERSUNK
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
      • GRUB SCREW
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
    • NUTS
      • COUPLING NUT
      • DOME NUT
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
        • MTERIC COARSE
      • FLANGE NUT
        • IMPERIAL UNC
        • METRIC COARSE
      • GLENLOCH NUT
      • HALF NUT
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
        • METRIC FINE
      • HEX NUT
        • IMPERIAL BSW
        • IMPERIAL SAE
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
        • METRIC FINE
      • LEFT HAND
        • HALF NUT
        • HEX NUT
      • NYLOC NUT
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
        • METRIC FINE
      • RIVNUT
        • LARGE FLANGE
        • STANDARD
      • VANDAL PROOF NUT
      • WING NUT
        • IMPERIAL UNC
        • IMPERIAL UNF
        • METRIC COARSE
    • OTHER FASTENERS
      • CIRCLIP
        • E TYPE
        • EXTERNAL
        • INTERNAL
      • EYE BOLT
      • EYE NUT
      • GREASE NIPPLE
      • KARABINER
      • KEY STEEL
      • PINS
        • COTTER PIN
      • R CLIP
      • SHAFT COLLAR
      • TURNBUCKLE
      • U BOLT
        • ROUND
      • WING SCREW
    • SCREWS
      • MACHINE SCREW
      • SECURITY SCREW
        • MACHINE SCREW
        • SELF TAPPING SCREW
      • SELF TAPPING SCREW
    • THREADED ROD
      • IMPERIAL
      • METRIC COARSE
    • WASHERS
      • HEAVY DUTY WASHER
        • IMPERIAL
        • METRIC
      • LIGHT FLAT WASHER
        • IMPERIAL
        • METRIC
      • NORDLOCK WASHER
      • SHIM WASHER
      • SPRING WASHER
        • IMPERIAL
        • METRIC
      • SQUARE WASHER
      • STARLOCK WASHER
      • TOOTHLOCK WASHER
        • EXTERNAL
        • INTERNAL
  • THREADED ROD
    • ACME ROD
      • LEFT HAND
      • STANDARD
    • LEFT HAND THREAD
    • STANDARD
      • IMPERIAL BSW
      • IMPERIAL UNC
      • IMPERIAL UNF
      • METRIC COARSE
      • METRIC FINE
  • WASHERS
    • BELVILLE WASHER
    • BRASS WASHER
    • CAPPED STARLOCK WASHER
      • IMPERIAL
      • METRIC
    • CONICAL SPRING WASHER
    • CUP WASHER
    • EXTRA HEAVY DUTY WASHER
    • FIBRE WASHER
    • HARDENED WASHER
    • HEAVY DUTY WASHER
      • IMPERIAL
      • METRIC
    • LIGHT FLAT WASHER
      • IMPERIAL
      • METRIC
    • NORDLOCK WASHER
    • SCHNORR DISC LOCK WASHER
    • SHIM WASHER
    • SPRING WASHER
      • IMPERIAL
      • METRIC
    • SQUARE WASHER
      • METRIC
    • STARLOCK WASHER
      • IMPERIAL
      • METRIC
    • STRUCTURAL WASHER
      • METRIC
    • TOOTHLOCK WASHER
      • EXTERNAL
      • INTERNAL
• RIGGING AND TRANSPORT
  • CHAIN BLOCKS
  • CLAMPS AND TROLLEYS
    • BEAM CLAMPS
    • GEARED GIRDER TROLLEYS
    • PUSH GIRDER TROLLEYS
    • VERTICAL LIFTING CLAMP
  • DRUM LIFTERS
  • ELECTRIC HOISTS
  • G70 PRODUCTS
    • CLAW HOOK
    • GRAB HOOK WITH SAFETY LATCH
    • GRADE 70 TRANSPORT CHAIN
      • DRUM
      • LOOSE
      • SETS
    • LOADBINDER
    • LUG LINK
    • SLIP HOOK
    • WINGED GRAB HOOK
  • G80 PRODUCTS
    • HAMMER LOCK JOINER
    • HOOKS
      • CLUTCH
      • CONTAINER HOOK
      • FORESTRY CHOKER
      • FOUNDRY HOOK
      • GRAB HOOK
      • SELF LOCKING HOOK
      • SLING HOOK
    • LIFTING CHAIN
    • LIFTING EYE
    • MASTER LINKS & RINGS
      • MULTIPLE
      • PEAR LINK
      • SINGLE
      • SINLGE
    • REPAIR KIT
      • SAFETY TRIGGER
      • SLING HOOK
    • SLING CONNECTOR
    • WELD ON BUCKET HOOK
    • WELD ON RING
  • LEVER HOISTS
  • LIFT SLINGS
    • FLAT LIFT SLING
    • RECOVERY TOW SLING
    • ROUND LIFT SLING
  • LIFTING CHAIN SETS
  • MILD STEEL CHAIN
    • DRUM
    • LOOSE
  • RATCHET TIE DOWNS
  • RIGGING HARDWARE
    • EYE BOLTS
    • EYE NUTS
    • KARABINERS
    • QUICK LINKS
    • SWIVELS
    • TURNBUCKLES
  • SHACKLES
    • BOW SHACKLE
    • CAPTIVE PIN SHACKLE
    • D SHACKLE
    • FLUSH PIN SHACKLE
    • LONG D SHACKLE
    • SAFETY PIN SHACKLE
  • TRANSPORT CHAIN SETS
• WORKSHOP EQUIPMENT & TOOLS
  • AIR TOOLS & ACCESSORIES
    • AIR DRIVERS
    • AIR DUSTER/BLOW GUNS
    • AIR GRINDERS
    • AIR HOSE & REELS
    • AIR IMPACT WRENCHES
    • AIR OPERATED GREASE GUNS
    • AIR RIVETERS
    • AIR SANDERS
    • AIR TOOL CONSUMABLES
    • COMPRESSORS
    • FITTINGS & ACCESSORIES
    • NEEDLE SCALERS
    • TYRE INFLATORS
  • AUTO SERVICE TOOLS
    • BALL JOINT SEPARATORS
    • CLIP & PANEL REMOVAL
    • ENGINE TOOLS
      • EXTRACTOR SOCKETS
      • INJECTOR SOCKET
      • OIL SENDER SOCKETS
      • OXYGEN SENSOR SOCKETS
      • SPARK PLUG SOCKETS
      • VACUUM SWITCH SOCKETS
    • HONE STONES
    • HOOK & PICKS
    • HOSE TOOLS
    • OIL TOOLS
    • SCREW EXTRACTORS & SETS
    • SETS
    • STUD & NUT REMOVERS
    • THREAD FILES
    • TYRE TOOLS
  • BARS
    • BUILDERS NAIL PULLERS
    • CROW BARS
    • PRY BARS
    • ROLL/HEEL BARS
    • SETS
    • WRECKING BARS
  • BITS & DRIVERS
    • DRIVERS
    • EXTENSIONS
    • HEX BIT HOLDERS
    • IMPACT BITS
      • 5/16" IMPACT BITS
      • HEX
      • NUT DRIVER
      • PHILLIPS
      • POZI
      • SQUARE/ROBINSON
      • TORX
    • IMPACT DRIVERS
    • SETS
    • SOCKET ADAPTORS
    • STANDARD BITS
      • FLAT/SLOTTED
      • HEX
      • PHILLIPS
      • POZI
      • SQUARE/ROBINSON
      • TORX
      • TPX SECURITY TORX
  • CONTAINERS
  • CONTRACTING TOOLS
    • BROOMS
    • BRUSH & SHOVELS
    • CAULKING GUNS
    • CHALKLINE & CHALK
    • CROW BARS
    • HANDLES
    • PAINT BRUSHES
    • POST RAMMER HEADS
    • RAKES
    • SCRAPERS
    • SHOVELS
    • SLEDGEHAMMERS
    • SPADES
  • CUTTING HAND TOOLS
    • BOLT CUTTERS & NIPPERS
      • BOLT CUTTERS
      • CUTTING NIPPERS
        • END CUT
        • END CUT (NIPPERS)
        • MIDGET CUTTER
    • CABLE/WIRE ROPE CRIMPING & CUTTING
      • CABLE CUTTERS
      • FENCING PLIERS
      • SIDE CUTTERS
      • WIRE ROPE & SPRING WIRE CUTTERS
    • ELECTRICAL CRIMP, CUT & STRIP
      • ELECTRICAL SCISSORS
      • PRECISION OBLIQUE CUTTERS
      • TERMINAL CRIMPERS
      • WIRE STRIPPERS
    • KNIVES
      • BLADES
      • SNAP OFF KNIVES
      • STARRETT SETS
      • UTILITY KNIVES
    • PIPE & TUBE CUTTING/BENDING
    • SAWS
      • BLADES
      • HACKSAWS
      • HANDSAWS
    • SCISSORS
    • SCRAPERS
    • SETS
    • TIN SNIPS
  • DEBURRING & EXTRACTING TOOLS
    • CARBIDE BURRS
    • COUNTERSINKS
    • CROSS HOLE COUNTERSINKS
    • DEBURRING TOOLS
    • EXTRACTOR SETS
    • EXTRACTOR SOCKETS
    • SCREW EXTRACTORS
    • STUD & NUT REMOVERS
    • THREADING TAP EXTRACTOR SET
  • ELECTRICAL SUPPLIES
    • BATTERIES
    • ELECTRIC ENGRAVERS
    • ELECTRICAL TESTING EQUIPMENT
      • DIGITAL MULTIMETERS
    • EXTENSION LEADS
    • FLEXIBLE LIGHTS WITH MAGNET
    • HEADLAMPS
    • JUMPER LEADS
    • LED WORKLIGHTS
    • MAGNETIC LIGHTS
  • ENGINEERING CONSUMABLES
    • ABRASIVES
      • CUTTING DISCS
      • DIAMOND BLADES
      • FLAP DISCS
      • GRINDING DISCS
      • QUICK CHANGE DISCS
      • STRIPX DISCS
      • SURFACE CONDITIONING DISCS
      • WIRE BRUSHES
    • ADHESIVES & SEALANTS
      • ADHESIVES
      • EPOXY
      • GASKETING
      • SEALANTS
      • SOLVENTS
    • APPLICATOR TOOLS
    • AUTOMOTIVE
    • CABLE TIES
      • BLACK
      • CABLE TIE GUN
      • COLOURED
      • METAL DETECTABLE
      • NATURAL
      • UNI BAND
        • BUCKLE
        • CLAMPING TOOL
        • STRAP
    • CLEAN UP
    • CLEANERS & DEGREASERS
    • CORROSION PROTECTION
    • CUTTING
      • CARBIDE BURRS
      • COUNTERSINKS
      • CROSS HOLE COUNTERSINKS
      • MULTITOOL
      • RECIPROCATING BLADES
    • DRILLING
      • ANNULAR BROACH DRILLS
      • CONCRETE DRILLS
        • SETS
      • DRILL SETS
      • LEFT HAND DRILLS
      • METAL DRILLS
        • EXTRA LONG SERIES
        • IMPERIAL HSS JOBBER DRILL
        • LONG SERIES DRILL
        • METRIC COBALT JOBBER DRILL
        • METRIC HSS JOBBER DRILL
        • REDUCED SHANK
          • IMPERIAL
          • METRIC
      • MORSE TAPER
    • EYE PROTECTION
    • FOOD GRADE
    • GREASES
    • HAND PROTECTION
      • COATED GLOVES
      • DISPOSABLE GLOVES
      • LEATHER GLOVES
      • WELDING GLOVES
    • HEARING PROTECTION
    • HOLESAWS
      • ARBORS & ACCESSORIES
        • ARBOR
        • KWIK CHANGE
        • PILOT DRILL
      • BI-METAL
      • KITSETS
      • MULTI-PURPOSE
      • SHEET METAL
      • SMOOTH CUTTING
    • LUBRICANTS & PENETRANTS
    • MARKING
      • PAINTS
      • PENS
    • SPECIALTY
    • TAPES
      • CLOTH TAPE
      • INSULATION TAPE
      • MASKING TAPE
      • THREAD SEAL TAPE
    • THREADING
      • BUTTON DIES
        • (MC) METRIC COARSE
        • (MF) METRIC FINE
        • (UNC) UNIFIED NATIONAL COARSE
        • (UNF) UNIFIED NATIONAL FINE
      • DIE NUTS
        • (BSPF) BRITISH STANDARD PIPE FITTING
        • (BSPT) BRITISH STANDARD PIPE TAPERED
        • (BSW) BRITISH STANDARD WHITWORTH
        • (MC) METRIC COARSE
        • (MF) METRIC FINE
        • (UNC) UNIFIED NATIONAL COARSE
        • (UNF) UNIFIED NATIONAL FINE
      • TAP SETS
        • (MC) METRIC COARSE
        • (MF) METRIC FINE
        • (UNC) UNIFIED NATIONAL COARSE
        • (UNF) UNIFIED NATIONAL FINE
      • TAPS
        • (BSPF) BRITISH STANDARD PIPE FITTING
        • (BSPT) BRITISH STANDARD PIPE TAPERED
        • (BSW) BRITISH STANDARD WHITWORTH
        • (MC) METRIC COARSE
        • (MF) METRIC FINE
        • (NPT) NATIONAL PIPE TAPERED
        • (UNC) UNIFIED NATIONAL COARSE
        • (UNF) UNIFIED NATIONAL FINE
      • THREAD REPAIR KITS
        • (MC) METRIC COARSE
        • (MF) METRIC FINE
        • (UNC) UNIFIED NATIONAL COARSE
        • (UNF) UNIFIED NATIONAL FINE
        • COMBINATION
    • WELDING
  • EQUIPMENT ACCESSORIES & SPARE PARTS
    • ACCESSORIES & ATTACHMENTS
    • REPAIR KITS
    • SPARE PARTS
  • HAMMERS
    • BALL PEIN
    • BODY WORK
    • CLAW
    • CLUB
    • COPPER/RAWHIDE
    • DEAD BLOW
    • ENGINEERS
    • MALLETS
    • SLEDGEHAMMERS
    • SLIDE HAMMER
    • SOFT FACE
    • THOR HAMMER REPLACEMENT FACES
    • THOR NYLON HAMMERS
    • WELDERS
  • HEX & TORX KEYS
    • BALL-END HEX KEYS
    • EXTRA LONG
    • SETS
    • STANDARD HEX KEYS
    • T-HANDLE
      • INDIVIDUAL
      • SETS
    • TORX KEY
    • TPX SECURITY TORX
  • INSULATED TOOLS
    • EXTENSION BARS
    • KNIVES
    • PLIERS
    • RATCHETS
    • SCREWDRIVERS
    • SETS
    • SOCKETS
    • SPANNERS
  • JACKS & WORKSHOP EQUIPMENT
    • AXLE STANDS
    • BOTTLE JACKS
    • ENGINE LIFTERS
    • PORTA POWER SETS
    • TROLLEY JACKS
    • WORKSHOP EQUIPMENT
  • LUBRICATION EQUIPMENT
    • DRUM PUMP & OIL HANDLING
    • FUNNELS
    • GREASE GUNS & ACCESSORIES
      • FITTINGS
      • GREASE CARTRIDGES
      • LEVER
      • TRIGGER
    • MEASURERS
    • OIL JUGS & CANS
    • ROTARY BARREL PUMPS
    • TRANSFER SUCTION GUNS
  • MAG DRILLS
    • ACCESSORIES
    • ANNULAR BROACH DRILLS
    • BATTERY POWERED
    • EXTRA COMPACT
    • PIPE BASED DRILLS
    • STANDARD
    • VACUUM
  • MEASURING & MARKING
    • CAULKING GUNS
    • CHALKLINE & CHALK
    • COMBINATION SQUARES
    • DIGITAL CALIPERS
    • ENGINEERS SQUARES
    • GUAGES
    • LEVELS
    • MICROMETERS
    • PENCILS & CHALK
    • RULERS
    • SCRIBERS
    • SETS
    • TAPE MEASURES/MEASURE WHEELS
    • TAPES
      • CLOTH TAPE
      • INSULATION TAPE
      • MASKING TAPE
      • THREAD SEAL TAPE
    • VERNIER CALIPERS
  • MERCHANDISE
  • PICK UP & INSPECTION TOOLS
    • CLAW PICKUP TOOLS
    • HOOK & PICKS
    • MAGNETIC TOOLS
    • MAGNIFIERS & MIRRORS
    • SETS
  • PLIERS
    • ADJUSTABLE OIL FILTER PLIERS
    • CABLE CUTTERS
    • CIRCLIP & SNAP RING
    • COMBINATION/LINESMAN
    • CRIMPING & STRIPPING
    • END CUTTERS
      • CARPENTERS
      • END NIPPERS
      • TOWER PINCERS
    • FENCING/WIRE TWISTING
    • GRIP PLIERS
    • GROOVE JOINT
    • LONG NOSE
    • SETS
    • SIDE/DIAGONAL CUTTERS
    • WATER PUMP
  • POWERED EQUIPMENT
    • AIR COMPRESSORS
    • BENCH GRINDERS
    • FUEL TRANSFER
    • GENERATORS
    • METAL CUTTING
    • WATER BLASTERS
    • WELDERS
  • PULLERS
    • 2/3 ARM PULLER
    • HYDRAULIC PULLER
    • SETS
    • SLIDE HAMMER
    • SPARE PARTS
    • UNIVERSAL PULLER
  • PUNCHES/CHISELS/FILES
    • CENTRE PUNCHES
    • COLD CHISELS
    • FILES
    • HEAVY DUTY HOLLOW PUNCH
    • LETTER PUNCH
    • NUMBER PUNCH
    • PIN PUNCHES
    • SETS
    • WOOD CHISELS
  • RIVETING TOOLS
    • MANDRELS
    • RIVETERS
      • AIR RIVETERS
      • HAND RIVETERS
      • LAZY TONG RIVETERS
    • RIVNUT TOOLS
  • SCREWDRIVERS
    • BLADES
    • FLAT/SLOTTED
    • HANDLES
    • HEX
    • HOSE CLIP DRIVERS
    • MAGNETISER/DEMAGNETISER
    • NUT DRIVER
    • PHILLIPS
    • PHILLIPS PH
    • POZI
    • POZI PZ
    • SCREWDRIVER SETS
    • SECURITY TORX TPX
    • SQUARE/ROBINSON
    • TX TORX
  • SOCKETRY
    • ADAPTORS & ACCESSORIES
      • IMPACT
      • REGULAR
    • BARS & HANDLES
      • EXTENSION BARS
      • POWER & FLEX BARS
      • RATCHETS
      • SETS
      • SLIDING T-BAR
      • SPEED BRACE
      • SPINNER HANDLES
      • T-BAR WITH SOCKET
    • BIT SOCKETS
      • BIT SOCKET SETS
      • FLAT/SLOTTED BIT
      • HEX BIT
      • PHILLIPS BIT
      • POZI BIT
      • RIBE
      • SPLINE
      • TORX BIT
      • TPX SECURITY TORX BIT
    • CROWFOOT
    • IMPACT SOCKET SETS
    • IMPACT SOCKETS
      • DEEP
      • STANDARD
    • REGULAR SOCKET SETS
    • REGULAR SOCKETS
      • DEEP
      • STANDARD
    • SOCKET HOLDING RAILS
    • SPARK PLUG SOCKETS
    • SPINNER HANDLES
    • TX-E SOCKETS
  • SPANNERS & WRENCHES
    • INDIVIDUAL
      • ADJUSTABLE
      • COMBINATION
      • CROWFOOT
      • DOUBLE END
      • FLARE NUT
      • HOOK & PIN
      • INSERT SPANNER
      • INSULATED
      • PIPE WRENCHES
      • PODGER WRENCHES
      • QUICK RING
      • SLOGGING
      • STRAP & CHAIN WRENCHES
    • SETS
      • DOUBLE END
    • SPANNER HOLDER
  • TENG TOOL TRAYS
  • THREADING
    • BUTTON DIES
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • DIE NUTS
      • (BSPF) BRITISH STANDARD PIPE FITTING
      • (BSPT) BRITISH STANDARD PIPE TAPERED
      • (BSW) BRITISH STANDARD WHITWORTH
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • TAP & DIE ACCESSORIES
    • TAP & DIE SETS
    • TAP SETS
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • TAPS
      • (BSPF) BRITISH STANDARD PIPE FITTING
      • (BSPT) BRITISH STANDARD PIPE TAPERED
      • (BSW) BRITISH STANDARD WHITWORTH
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (NPT) NATIONAL PIPE TAPERED
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
    • THREAD REPAIR KITS
      • (MC) METRIC COARSE
      • (MF) METRIC FINE
      • (UNC) UNIFIED NATIONAL COARSE
      • (UNF) UNIFIED NATIONAL FINE
      • COMBINATION
    • THREADING TAP EXTRACTOR SET
    • THREADLOCKING
  • TOOL KITS
    • PORTABLE TOOL KITS
    • ROLLER CABINET TOOL KITS
    • STACKER TOOL KITS
    • STATIONARY TOOL KITS
    • TOP BOX TOOL KITS
  • TOOL SETS
    • BIT SETS
    • CLIP RAIL SETS
    • GENERAL TOOL SETS
    • INSULATED SETS
    • SCREWDRIVER SETS
    • SOCKET & ACCESSORY SETS
    • SPANNER & WRENCH SETS
    • TAP & DIE SETS
    • TOOL & SOCKET SETS
    • WALL RACK SETS
  • TOOL STORAGE
    • CANVAS TOOL BAGS
    • CARRYING CASES
    • MAGNETIC TRAYS
    • MIDDLE/STACKER
    • ROLLER CABINET
    • STORAGE TRAYS
    • TOOL BOXES
    • TOP BOX
    • WALL RACKS
    • WORK BENCHES
    • WORK STATIONS/FLOOR CABINETS
  • TORQUE TOOLS & ACCESSORIES
    • SETS
    • TORQUE ACCESSORIES
    • TORQUE MULTIPLIERS
    • TORQUE SCREWDRIVERS
    • TORQUE SPANNERS
    • TORQUE WRENCHES
  • VICES & CLAMPS
    • C & G CLAMPS
    • ENGINEER VICES
    • F CLAMPS
    • QUICK LEVER CLAMPS
    • SASH CLAMPS
    • WELDING CLAMPS
  • WELDING TOOLS & EQUIPMENT
    • GRASSHOPPER MAGNETS
    • LIGHTERS AND TORCHES
    • MIG PLIERS
    • SNAKE MAGNETS
    • SOLDERING IRONS
    • WELDERS
    • WELDING HELMETS
    • WELDING MAGNETS
    • WELDING TABLE
  • WHEELS & CASTORS

STAINLESS STEEL

Code	Image	Product Name	Stock Level	RRP	Price	Quantity
LW60622		M6 x 22 x 1.6 Light Flat Fender Washer 316 Stainless Steel	Stock Level: In Stock	$0.76 Inc GST	$0.42 Inc GST
LW60816		M8 x 16 x 1.6 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$0.29 Inc GST	$0.16 Inc GST
LW60819		M8 x 19 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$0.51 Inc GST	$0.28 Inc GST
LW60822		M8 x 22 x 1.2 Light Flat Fender Washer 316 Stainless Steel	Stock Level: In Stock	$1.96 Inc GST	$1.08 Inc GST
LW60832		M8 x 32 x 1.6 Light Flat Fender Washer 316 Stainless Steel	Stock Level: In Stock	$1.89 Inc GST	$1.04 Inc GST
LW61021		M10 x 21 x 1.2 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$0.32 Inc GST	$0.17 Inc GST
LW6102216		M10 x 22 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$0.73 Inc GST	$0.40 Inc GST
LW6102416		M10 x 24 x 1.6 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$0.73 Inc GST	$0.40 Inc GST
LW61030		M10 x 30 x 1.6 Light Flat Fender Washer 316 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$1.40 Inc GST	$0.77 Inc GST
LW61032		M10 x 32 x 1.6 Light Flat Fender Washer 316 Stainless Steel	Stock Level: In Stock	$1.26 Inc GST	$0.69 Inc GST
LW61224		M12 x 24 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$0.58 Inc GST	$0.32 Inc GST
LW61232		M12 x 32 x 1.6 Light Flat Fender Washer 316 Stainless Steel	Stock Level: In Stock	$1.65 Inc GST	$0.91 Inc GST
LW61428		14 x 28 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$2.85 Inc GST	$1.57 Inc GST
LW61632		M16 x 30 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$1.19 Inc GST	$0.66 Inc GST
LW62037		M20 x 37 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$1.58 Inc GST	$0.87 Inc GST
LW622		M22 Light Flat Washer 316 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$3.84 Inc GST	$2.11 Inc GST
LW62444		M24 x 44 Light Flat Washer 316 Stainless Steel	Stock Level: In Stock	$3.90 Inc GST	$2.15 Inc GST
LWI403		1/8 x 5/16 x 3/4 Light Flat Washer 304 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$0.08 Inc GST	$0.04 Inc GST
LWI40512.5		3/16 x 1/2 Light Flat Washer 304 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$0.13 Inc GST	$0.07 Inc GST
LWI40532		3/16 Light Flat Fender Washer 304 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$0.78 Inc GST	$0.43 Inc GST
LWI406		1/4 x 5/8 Light Flat Washer 304 Stainless Steel	Stock Level: In Stock	$0.36 Inc GST	$0.20 Inc GST
LWI40632		1/4 Light Flat Fender Washer 304 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$0.93 Inc GST	$0.51 Inc GST
LWI408		5/16 x 3/4 Light Flat Washer 304 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$0.39 Inc GST	$0.22 Inc GST
LWI40825		5/16 x 1 Light Flat Washer 304 Stainless Steel	Stock Level: Available - Ships in 4-8 Days	$0.67 Inc GST	$0.37 Inc GST